Schenchen F6-12L peristaltic filling pump

Schenchen F6-12L High Speed Intelligent Peristaltic Tube Pump with YZ35 Feeder, suitable for high flow volume, high efficiency and precision dosing.

The F6-12L peristaltic pump has a stainless steel housing and touch screen control. The touch screen provides simple operation and a dynamic display of the current status. You get a complete overview of the dispensing task.

The speed range is 0.1-600 rpm and the flow rate is 0.69-12,000 ml/min.

You can connect a foot pedal or start charging with external control. The output signal can be used for remote monitoring of the pump.

Functions and features:
Color 4.3" LCD screen with clear image quality. Dynamic display of real-time transmission status. Flow rate, motor speed, setting parameters and system configuration are displayed on the same screen.
Intelligent calibration function, calibrate the flow rate and dosage amount to ensure flow accuracy.
Power-off memory function that stores running parameters over time - safely and reliably.
Automatic temperature control system that effectively reduces fan noise.
Dispensing counter function where you have to manually clear the number. This is convenient for counting the total number of doses during manual dosing.
With the on-line micro-adjustment function, you can adjust the flow rate during production to avoid filling errors caused by tube fatigue and loss of flexibility.
The pump can store 60 commonly used charging methods.
Rear suction angle adjustment to avoid fluid dripping when the pump stops.
External start/stop control function - you can connect a foot pedal or computer control while working on the charging line.

Technical specification:
Flow rate range: 0.69 - 12000 ml/min/channel
Speed range: 0.1-600 rpm
Speed resolution: 0.01 rpm
Dispensing volume range: 0.1 - 9999.99 ml
Dispensing volume resolution: 0.01 ml
Release time: 0.1-9999.99 sec
Pause time: 0.1-9999.99 sec
Time resolution: 0.01 sec
Copy numbers: 1-9999, setting "0" means unlimited
Rear suction angle: 0-360°
Dosing accuracy: <±0.5%
Motor type: Servo motor
Display: 4.3" industrial quality, true color LCD screen
Control method: Touch screen and membrane keyboard
Start/stop, turn signal: Passive switching signal, e.g. foot pedal. Active switching signal: 5V, 12V and 24V (optional)
Communication interface: RS232/RS485 supports MODBUS protocol (RTU mode)
Output pressure: 0.3 Mpa (3 bar)
Power consumption: < 300W