ELS-3100 Top Blister Labeler

Operating principle: The operator places the products on the conveyor with the correct orientation and with the correct product spacing. The stable movement of the blisters without rotation is ensured by stops fixed to the conveyor. The perforated label parallel to the running direction is glued to the blister from above by the equipment. After the initial adhesion, a label smoothing unit performs the label application. The original label of the blisters or the foil closing the blister is often wavy. As a result, the surface of the applied label can also be uneven. The labeled products are placed on a stainless steel tray, which has edge barriers in all directions, so that even the smallest product cannot fall off it. The labeled products are counted by a counting module at the end of the labeling machine's conveyor. The operator has the option of "minusing" the product on the counter on the HMI panel if the labeled product does not meet expectations.

Technical parameters:
Smallest Product Size: 40 mm (width) x 100 mm (length-direction of travel)
Largest Product Size: 114 mm (width) x 145 mm (length)
Smallest Product Height: 10 mm
Largest Product Height-Thickness: 50 mm
Product Material: Transparent PE blister, sealed with paper or aluminum label
Label Size: Typically 5-5 mm smaller than the surface to be labeled
Labeling Capacity: Max 40 pcs/min (capacity depends on the feeding speed)
Labeling Head Type: Endiline Applicator Suitable for work between 2-8 C°.
Labeling Accuracy: +/- 2 mm (assuming ideal blister and label)
Label Tape Width: Max. 160 mm
Label roll size: outer diameter maximum 300mm / inner tube diameter 76mm
Power supply: 100-240V AC 50-60 Hz (1kW)
Working height: 960mm (+/- 50mm adjustable)
Conveyor width: 150 mm